Monthly Archives: October 2017

10 posts

Weatherproof Enclosure

choosing Weatherproof Enclosure and outdoor electrical enclosure products Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  choosing Weatherproof Enclosure and outdoor electrical enclosure products Selection Tips DETAILED TECHNICAL SPECIFICATION Weatherproof enclosure must be factory fabricated from an approved switch board manufacturer and must be dust and water protected complying with I.E.C. No. 144 Degree of […]

Refrigerant Piping

choosing Refrigerant Piping Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  choosing Refrigerant Piping Selection Tips  DETAILED TECHNICAL SPECIFICATION a) Refrigerant piping assembled must consist of copper tubing  to ASTM specifications B.88, Type “K” hard drawn and soldered joints Fittings must be of wrought copper or fine cast brass. Where […]

HVAC PIPE WORKS AND FITTINGS

choosing HVAC PIPE WORKS AND FITTINGS Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  choosing HVAC PIPE WORKS AND FITTINGS Selection Tips  DETAILED TECHNICAL SPECIFICATION General a) They must be installed with a view to an easy and even  flow of fluid to and from all apparatuses without air pockets It should be […]

Mini-Split A/C Units

choosing Mini-Split A/C Units Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  choosing Mini-Split A/C Units Selection Tips  DETAILED TECHNICAL SPECIFICATION Mini Split Air Conditioning Units must consist of an air cooled condensing unit  and a matching fan coil unit, factory assembled, pre-wired pre-charged and factory tested, capable of giving the […]

DUCT WORK

DUCT WORKS Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  DUCT WORKS Selection Tips DETAILED TECHNICAL SPECIFICATION A. All ducting must be made of galvanized steel sheet to ASTM A525 lock-forming quality, having zinc coating of 275gm/M² for both sides in accordance with ASTM A90 and of tensile strength […]

D.X. UNITS

choosing D.X. UNITS Selection Tips DETAILED TECHNICAL SPECIFICATION

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  choosing D.X. UNITS Selection Tips  DETAILED TECHNICAL SPECIFICATION GENERAL All units must be rated in accordance with the ARI Standard and must be  designed to conform to ASHRAE 15 latest revision and in accordance with UL 1995  All units must […]

Direct Expansion Unit

Choosing Single Packaged Direct Expansion Unit Selection Tips

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين Choosing Single Packaged Direct Expansion Unit Selection Tips The units must be internationally reputed, have undisputed record of performance using(R407 or R410) and must be approved according to regulations Units must be factory assembled, precharged, prewired and tested.Each unit […]

AL-BABTAIN

SUPPLIERS SERVICE NUMBERS أرقام مراكز الخدمات للوكلاء AL-BABTAIN CASIO BEC LG SAMSUNG

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  SUPPLIERS SERVICE NUMBERS أرقام مراكز الخدمات للوكلاء  AL-BABTAIN CASIO BEC LG SAMSUNG  Al Babtain Group of companies Salehia – Babtain Building No. 3 – Salah Al-Din Street Tel: 22412730 Fax: 22491378 ABDUL AZIZ S. AL-BABTAIN & SONS CO. FOR […]

CLADDING

THERMAL INSULATION AND LAGGING HVAC CLADDING

الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين  THERMAL INSULATION AND LAGGING HVAC General Requirements Thermal insulation shall be of approved material with thermal conductivity  not higher than 0.29 Btu/Hr/Ft2/F inch thickness measured at an average  temperature of 100 F. Thermal insulation shall be non-corrosive to the […]